LR3/Disco 3
51 .
Install the ECM cover.
52 .
Connect the A/C compressor low pressure line.
Remove the blanking caps from the ports.
Install a new O-ring seal.
Tighten the retaining bolt to 9 Nm (7 lb.ft).
53 .
Install the auxiliary battery tray. For additional information, refer to
Auxiliary Battery Tray (76.10.31)
(Section 414-01)
54 .
Install the battery tray. For additional information, refer to
Battery Tray (76.10.30)
(Section 414-01)
55 .
Install the battery. For additional information, refer to
Battery (86.15.01)
(Section 414-01)
56 .
Check and top-up the engine oil.
57 .
Recharge the A/C system. For additional information, refer to
Air Conditioning (A/C) System
Recovery, Evacuation and Charging (82.30.02)
(Section 412-00)
58 .
Install the engine cover. For additional information, refer to
Engine Cover - 2.7L Diesel (12.30.50)
(Section 501-05)
59 .
Connect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
60 .
Fill and bleed the power steering system. For additional information, refer to
Power Steering
System Filling and Bleeding
(Section 211-00)