LR3/Disco 3
All vehicles
2 .
Connect the universal joint to the steering gear.
Install new patchlock bolt and tighten to 25 Nm (18 lb.ft).
1 .
Install the oil strainer pick-up assembly. For additional information, refer to
Oil Pump Screen and
Pickup Tube (12.60.20)
(Section 303-01)
2 .
Connect the fuel cooler line.
Remove the blanking caps from the ports.
3 .
Install the turbocharger heat shield.
Install the two retaining bolts.
Tighten to 10 Nm (7 lb.ft).