LR3/Disco 3
13 .
Remove the crossmember.
Remove the 4 nuts and bolts.
14 .
Install the exhaust system. For additional information, refer to
Exhaust System (30.10.08)
(Section
309-00)
15 .
Install the fuel filter.
Install the two retaining bolts and tighten to 10 Nm (7 lb.ft).
Connect the four fuel lines.
16 .
Install the engine undershield.
17 .
Connect the power steering supply hose.
Remove the blanking caps from the ports.
Remove the hose clamp.
