LR3/Disco 3
Cooling System Draining, Filling and Bleeding (26.10.01)
1 . Position the vehicle on a lift.
2 . Set the heater controls to maximum.
3 . Disconnect the battery ground cable.
Specifications
4 . Remove the engine cover.
Engine Cover - 4.0L (12.30.50)
5 .
Remove the coolant expansion tank cap.
6 . Remove the front LH splash shield.
7 . Remove the radiator access panel.
Published : Jul 6, 2004
WARNING: Since injury such as scalding could be caused by escaping steam or coolant, do not remove
the filler cap from the coolant expansion tank while the system is hot.
WARNING: Since injury such as scalding could be caused by escaping steam or coolant, do not remove
the filler cap from the coolant expansion tank while the system is hot.
Remove the 4 clips.
Remove the 4 bolts.