LR3/Disco 3
Always install blanking plugs to any open orifices or lines. Failure to follow this instruction may result in foreign
matter ingress to the fuel injection system.
CAUTION: Do not disassemble the fuel injectors or clean the nozzles, even with an ultrasonic cleaner.
Always install new fuel injectors when required.
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Remove the engine cover. For additional information, refer to
Engine Cover - 2.7L Diesel (12.30.50)
(Section 501-05)
3 .
Disconnect the low-pressure fuel lines.
Install blanking caps to the exposed ports.
4 .
Disconnect both exhaust gas recirculation (EGR) coolant cross-over pipe hoses.
Clamp the EGR coolant hoses to minimize coolant loss.
5 .
Remove the EGR coolant cross-over pipe.
Remove the two retaining bolts.