LR3/Disco 3
7 .
Remove the crankcase vent oil separator locating stud.
8 .
NOTE :
Left-hand shown, right-hand similar.
Release the high-pressure fuel supply lines.
Remove the retaining bolt.
9 .
CAUTION: Make sure that the high-pressure fuel supply line remains in contact with the fuel
injection supply manifold and the fuel injection diverter rail until both unions have been detached and
cleaned. Failure to follow this instruction may result in foreign matter ingress to the fuel injection
system.
NOTE :
Left-hand shown, right-hand similar.
Remove and discard the high-pressure fuel supply lines.
Install blanking caps to the exposed ports.