landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Removal And Installation > < Description And Operation|Page 1378
Page 1
background image

 
 

Specifications  

General Specification  
 

 
 
* This engine is NOT compatible with 'Bio-diesel' fuel Torque Specifications  
 

 
 
Fuel Pressures  
 

 
 

Published : Feb 4, 2005

Item 

Description 

* Recommended fuel  Diesel or Automotive Gas Oil (AGO) to EN590 Specification

Description 

Nm lb-ft

High pressure fuel supply lines to injector and supply manifold unions: 

  

  

Stage 1 - Union to injector 

15  11 

Stage 2 - Union to supply manifold 

15  11 

Stage 3 - Union to injector 

30  22 

Stage 4 - Union to supply manifold 

30  22 

High pressure fuel supply lines to supply manifold and diverter rail unions:   

  

Stage 1 - Union to supply manifold 

15  11 

Stage 2 - Union to diverter rail 

15  11 

Stage 3 - Union to supply manifold 

30  22 

Stage 4 - Union to diverter rail 

30  22 

Fuel injection diverter rail studs 

23  17 

Fuel supply line retaining bolts 

10  7 

Crankcase vent oil separator locating stud 

10  7 

EGR coolant cross-over pipe bolts 

13  10 

Intake air shut-off throttle retaining stud 

10  7 

Intake air shut-off throttle elbow retaining bolt 

10  7 

Fuel injection pump pulley nut 

50  37 

Fuel injection pump securing bolts 

23  17 

Fuel injection pump belt rear cover retaining bolt 

7 

5 

Fuel injection pump belt tensioner retaining bolt 

25  18 

Fuel injector retaining bolts 

10  7 

Component 

bar 

psi 

Fuel pump 

0.5 

7.25 

High pressure fuel injection pump  1650 maximum 23931 maximum

Removal And Installation > < Description And Operation|Page 1378