LR3/Disco 3
Remove the oil level indicator tube retaining bolt.
Remove and discard the O-ring seal.
13 .
Remove the turbocharger oil return tube retaining bolt.
Release the turbocharger oil return tube.
Install blanking caps to the exposed ports.
14 .
Remove the turbocharger oil return tube.
Remove the two retaining bolts.
Remove and discard the gasket.
Install blanking caps to the exposed ports.
Remove and discard the O-ring seals.
15 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Lower the vehicle.