LR3/Disco 3
Accessory Drive Belt (86.10.03)
Removal
Installation
Published : May 13, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Remove the viscous fan assembly. For additional information, refer to
Cooling Fan (26.25.19)
(Section 303-03)
3 .
Release the accessory drive belt.
Rotate the accessory drive belt tensioner counterclockwise.
4 .
Remove the accessory drive belt.
1 .
To install, reverse the removal procedure.
Clean and inspect the drive pulleys for damage.
2 .
Connect the battery ground cable. For additional information, refer to
Specifications
(Section 414-00)