LR3/Disco 3
Accessory Drive Belt Tensioner (86.10.06)
Removal
Installation
Published : Jul 1, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Remove the viscous fan assembly. For additional information, refer to
Cooling Fan (26.25.19)
(Section 303-03)
3 .
Release the accessory drive belt.
Rotate the accessory drive belt tensioner counterclockwise.
4 .
Remove the accessory drive belt tensioner.
Remove the bolt.
1 .
To install, reverse the removal procedure.
Clean and inspect the drive pulleys for damage.
Tighten the tensioner bolt to 40 Nm (30 Ib.ft).
2 .
Install the viscous fan assembly. For additional information, refer to
Cooling Fan (26.25.19)
(Section
303-03)
3 .
Connect the battery ground cable. For additional information, refer to
Specifications
(Section 414-00)
