LR3/Disco 3
Starter Motor (86.60.01)
Removal
Published : Jul 14, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
3 .
Remove the engine undershield. For additional information, refer to
Engine Undershield (76.10.50)
(Section 501-02)
4 .
Release the fuel cooler.
Remove the retaining bolt.
5 .
Reposition the fuel cooler and the fuel filter housing.
Remove the two retaining bolts.
6 .
Remove the wiring harness retaining bolt.
7 .
Remove the starter motor retaining bracket.
Remove the four retaining bolts.