LR3/Disco 3
Ignition Coil-On-Plug (18.20.44)
Removal
Published : Mar 2, 2005
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00 )
2 .
Remove the engine cover. For additional information, refer to
Engine Cover - 4.4L (12.30.50)
(Section 501-05 )
3 .
Remove the ignition coil cover.
Release from the 2 clips.
4 .
Disconnect the ignition coil-on-plug electrical connector.
5 .
Remove the ignition coil-on-plug.
Remove the bolt.
Remove and discard the seal.
