LR3/Disco 3
Spark Plugs (18.20.02)
Removal
Installation
Published : May 18, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Remove the ignition coil-on-plugs. For additional information, refer to
Ignition Coil-On-Plug
(18.20.44)
(Section 303-07)
3 .
Remove the remaining ignition coil-on-plugs.
4 .
Clean the area surrounding the spark plugs.
5 .
Remove the spark plugs.
1 .
Install the spark plugs.
Tighten the spark plugs to 25 Nm (18 lb.ft).
2 .
Install the ignition coil-on-plug. For additional information, refer to
Ignition Coil-On-Plug (18.20.44)
(Section 303-07)
3 .
Install the remaining coil-on-plugs.
4 .
Connect the battery ground cable. For additional information, refer to
Specifications
(Section 414-00)
