LR3/Disco 3
Glow Plug Module (19.60.33)
Removal
NOTE :
Published : Jul 19, 2004
The glow plug module is an integral part of the engine control module and cannot be replaced separately.
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Remove the four-wheel drive (4WD) control module. For additional information, refer to
Four-Wheel
Drive (4WD) Control Module (41.30.01)
(Section 308-07)
3 .
NOTE :
Right hand drive shown, for Left hand drive reverse the sequence.
Disconnect the three glow plug module electrical connectors in the sequence shown.
Position the three engine harness electrical connectors aside for access.
4 .
Remove the glow plug module securing plate.
Remove the four retaining bolts.
5 .
Remove the glow plug module.
Remove the glow plug module top cover.