LR3/Disco 3
Glow Plug Relay (19.60.34)
Removal
NOTE :
Installation
Published : Jul 13, 2004
This procedure shows the removal and installation of the right hand bank and left hand bank glow plug relays. The
glow plug relays are available individually.
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Remove the battery junction box (BJB) lid.
Release the BJB latch.
3 .
Remove the RH bank glow plug relay.
4 .
Remove the LH bank glow plug relay.