LR3/Disco 3
Glow Plugs (19.60.31)
Removal
Installation
Published : Jul 19, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Remove the crankcase vent oil separator. For additional information, refer to
Crankcase Vent Oil
Separator (17.10.04)
(Section 303-08)
3 .
Remove the glow plugs.
1 .
To install, reverse the removal procedure.
Tighten the glow plugs to 10 Nm (7 lb.ft).