LR3/Disco 3
Charge Air Cooler (19.46.19)
Removal
Installation
Published : May 24, 2004
1 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
2 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
3 .
Remove the radiator. For additional information, refer to
Radiator (26.40.01)
(Section 303-03)
4 .
Remove the charge air cooler.
Remove the 2 retaining pins.
1 .
Install the charge air cooler.
Install the 2 retaining pins.
2 .
Install the radiator. For additional information, refer to
Radiator (26.40.01)
(Section 303-03)
3 .
Connect the battery ground cable. For additional information, refer to
Specifications
(Section 414-00)