LR3/Disco 3
The purge valve and purge hose are located on the air intake manifold, which is attached to the top of the engine and
covered by the engine acoustic cover.
The purge hose is connected, at the right hand rear of the engine, from the purge valve with a quick release coupling to
the purge line which runs parallel with the fuel feed line along the top of the fuel tank to the charcoal canister.
The purge hose is connected to the purge valve on the air intake manifold and is routed, via a hose clamp, to a
connection on the manifold. The hose is connected to the air intake manifold with a quick release connector.
The purge valve is located on a bracket at the rear of the air intake manifold and secured with a single bolt. The purge
valve is a solenoid operated valve which is closed when de-energised. The valve is controlled by the Engine Control
Module (ECM) and is cycled when engine operating conditions are correct to allow purging of the charcoal canister.
Item Part Number
Description
1
-
Electric throttle
2
-
Air intake manifold
3
-
Fuel feed jump hose (Ref. only)
4
-
Purge hose
5
-
Purge valve
6
-
Bracket
7
-
Hose clamp
8
-
Manifold to purge valve hose