LR3/Disco 3
Evaporative Emission Canister (17.15.13)
Removal
Published : May 11, 2004
1 .
Remove the spare wheel and tire.
2 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
3 .
Remove the evaporative emissions canister.
Remove the 2 bolts.
Disconnect the 3 lines.
Disconnect the electrical connector.
4 .
NOTE :
Do not disassemble further if the component is removed for access only.
NAS vehicles: Remove the fuel tank leakage detection module.
Remove the 3 screws.
