LR3/Disco 3
Heated Oxygen Sensor (HO2S) LH (19.22.16)
Special Service Tools
Wrench, HO2S
310-121 (LRT-19-014)
Removal
Published : May 21, 2004
1 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
2 .
Disconnect the LH catalytic converter from the exhaust manifold.
Remove and discard the 2 bolts.
3 .
Disconnect the RH catalytic converter from the exhaust manifold.
Remove and discard the 2 bolts.
4 .
Using the special tool, remove the HO2S.
