LR3/Disco 3
Specifications
Lubricants
* Apply to area around sensor threads prior to attempting to remove sensor General Specification
Torque Specifications
+ Apply suitable high temperature anti-seize compound to threads of sensor * New bolts must be installed ++ Apply anti-
seize lubricant to threads - See Lubricants
Published : Feb 4, 2005
Item
Land Rover Part No.
* HO2s removal STC 50545
HO2s threads
Apply suitable high temperature anti-seize compound to threads of sensor
Item
Description
Engine management system:
Make
Denso
Type
PAG EMS Generation 1
Camshaft position sensor:
Make
Denso
Type
Left-hand XR83-6B288-AB and Right-hand 2W93-6B288-AA
Crankshaft position sensor:
Make
Denso
Type
XW43-6C315-BB
Description
Nm lb-ft
Variable camshaft timing (VCT) oil control solenoid bolt 10 7
Knock sensor (KS) bolts
20 15
Crankshaft position (CKP) sensor Torx screw
8
6
+ Heated oxygen sensor (HO2S)
45 33
* RH catalytic converter to exhaust manifold bolts
22 16
* LH catalytic converter to exhaust manifold bolts
22 16
Mass air flow (MAF) sensor Torx screws
2
1.5
Camshaft position (CMP) sensor Torx screw
7
5
Engine coolant temperature (ECT) sensor
18 13
++ Fuel temperature sensor
7
5
+ Catalyst monitor sensor
45 33
Catalyst monitor sensor heat shield bolts
10 7
Engine oil pressure sensor
12 9
ECM retaining bolts
1.5 1.1
MAP sensor retaining bolts
3
2
Radiator access panel bolts
10 7
Engine oil temperature sensor
20 15
