LR3/Disco 3
6 . If installed, remove the transmission heat shield.
7 . Place a container under the transmission.
8 .
Remove the transmission fluid filler/level plug.
Remove the 4 bolts.
WARNING: Observe due care when draining transmission fluid as the fluid can be very hot.
WARNING: Observe due care when working near a hot exhaust system.
CAUTION: The gearbox fluid level must only be checked when the temperature of the fluid is between 30
degrees and 50 degrees. The fluid level obtained will be incorrect if the reading is outside this temperature
range.
Clean the area around the filler/level plug.
Remove and discard the sealing washer.