LR3/Disco 3
Using a transmission jack, support the transmission.
Remove the 15 bolts.
14 .
Install the torque converter retainer.
15 .
NOTE :
Do not disassemble further if the component is removed for access only.
Remove the transmission from the transmission jack.
16 .
Remove the torque converter retainer.
17 .
Using the special tools, remove the torque converter.
18 .
CAUTION: Care must be taken to avoid damage to the seal register and running surface.
Carefully remove and discard the torque converter fluid seal.
19 .
Remove the wiring harness bracket.