LR3/Disco 3
Transmission (44.20.01)
Special Service Tools
Wrench adapter
303-1069
Removal
Published : Aug 20, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
3 .
Remove the front driveshaft. For additional information, refer to
Front Driveshaft - 2.7L Diesel
(47.15.02)
(Section 205-01)
4 .
Remove the rear driveshaft. For additional information, refer to
Rear Driveshaft (47.15.03)
(Section
205-01)
5 .
Remove the starter motor. For additional information, refer to
Starter Motor (86.60.01)
(Section 303-
06)
6 .
Release the selector cable.
Using an additional wrench, restrain the clamping bush and loosen the locknut.
Compress the latch and release the cable.
7 .