LR3/Disco 3
Connect the selector cable to the transmission.
Engage the inner cable with the lever clamping bush.
Connect the selector cable to its abutment bracket.
3 .
Position the selector cable to its guide bracket.
4 .
Install the floor console upper trim panel.
5 .
Adjust the selector cable.
6 .
Install the transmission heat shield.
Tighten the bolts to 10 Nm (7 lb.ft).
7 .
If installed, install the transmission undershield.
Tighten the bolts to 10 Nm (7 lb.ft).