LR3/Disco 3
press down evenly on the diapragm fingers as shown, until the clutch cover adjustment ring can be
rotated fully counterclockwise. With the adjustment ring held in this position, release the pressure on
the diaphragm fingers. The adjustment ring will be held in this position until self adjustment on the
application of the clutch pedal.
Check, and if necessary, reset the clutch pressure plate.
2 .
CAUTION: Examine the flywheel for signs of scoring or overheating. Renew if worn or
damaged.
CAUTION: Examin the clutch release bearing for signs of wear or damage. Renew if necessary.
CAUTION: Examine the spigot bearing for signs of wear or damage. Renew if necessary.
Clean the component mating faces.
3 .
CAUTION: Install the clutch disc with 'TRANSMISSION SIDE' marking against the clutch cover.
CAUTION: Use the special tool to align the components.
CAUTION: Working in a diagonal sequence, progressively tighten the bolts.
NOTE :
Restrain the flywheel.
Install the clutch disc and pressure plate.