LR3/Disco 3
Gearshift Control Shaft Seal (37.23.10)
Special Service Tools
Seal extractor
308-621
Seal installer
308-622
Removal
Published : Jul 13, 2004
1 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
2 .
Remove the transfer case. For additional information, refer to
Transfer Case - 2.7L Diesel
(41.20.25.99)
(Section 308-07)
3 .
Release the gearshift rod.
Remove the clip.
Remove and discard both O-ring seals.
4 .
Remove the selector rod coupling.