LR3/Disco 3
Transfer Case Shift Motor (41.30.03)
: May 12, 2004
1 .
Raise and support the vehicle.
2 .
Remove the transmission crossmember.
3 .
Remove the shift motor.
Lower the rear of the transmission for access.
Disconnect the electrical connector.
Remove the 4 Torx bolts.
1 .
Install the shift motor.
Clean the components.
Tighten the Torx bolts to 25 Nm (18 lb.ft).
Connect the electrical connector.
2 .
Install the transmission crossmember.
3 .
Use T4 to re-calibrate a new transfer case shift motor.
