LR3/Disco 3
Transfer Case Rear Output Shaft Seal - 4.4L (41.20.54)
Special Service Tools
Remover/installer (LRT-54-015)
205-726
Seal installer
308-637
Installer
204-525/1
Removal
Published : Apr 28, 2005
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
3 .
Drain the transfer case fluid. For additional information, refer to
Transfer Case Draining and Filling
(41.20.04)
(Section 308-07)
4 .
Remove the transfer case. For additional information, refer to
Transfer Case - 4.4L (41.20.25.99)
(Section 308-07)
5 .
With assistance, secure the transfer case with its transmission mating face down on a flat surface.