LR3/Disco 3
Transfer Case - 4.0L (41.20.25.99)
Removal
Published : Jul 18, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
3 .
Remove the front driveshaft. For additional information, refer to
Front Driveshaft - 4.0L (47.15.02)
(Section 205-01)
4 .
Remove the rear driveshaft. For additional information, refer to
Rear Driveshaft (47.15.03)
(Section
205-01)
5 .
Remove the transmission support insulator.
Remove the 4 bolts.
6 .
Disconnect the transfer case 3 electrical connections.
7 .
Release the wiring harness from the transfer case.
Remove the 3 bolts.
Release the clip.