LR3/Disco 3
Exhaust System (30.10.08)
Special Service Tools
Wrench, HO2S
310-121 (LRT-19-014)
Removal
Published : May 19, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
3 .
Remove the engine undershield. For additional information, refer to
Engine Undershield (76.10.50)
(Section 501-02)
4 .
Remove the transmission crossmember. For additional information, refer to
Transmission Support
Crossmember (76.10.09 or 76.10.92)
(Section 502-02)
5 .
Release the LH front HO2S wiring harness.
Disconnect the electrical connector.
6 .
Release the RH front HO2S wiring harness.
Disconnect the electrical connector.