Land Rover Workshop Service and Repair Manuals

Installation  

5 .    

NOTE :

  Do not disassemble further if the component is removed for access only. 

  Remove the LH tail pipe. 

Using 100-051, cut the tail pipe at the point indicated by a depression in the pipe.

6 . 

  Remove the RH tail pipe. 

Using 100-051, cut the tail pipe at the point indicated by a depression in the pipe.

1 .    

NOTE :

  Do not tighten the retaining clamp at this stage. 

  Position the RH tail pipe to the muffler assembly.

Clean the components. 

Install the retaining clamp. 

2 .    

NOTE :

  Do not tighten the retaining clamp at this stage. 

  Position the LH tail pipe to the muffler assembly.

Clean the components. 

Install the retaining clamp. 

3 . 

  With assistance, install the muffler assembly. 

Attach the exhaust hangers. 

Install a new gasket. 

Tighten the catalytic converter nuts and clamp to 48 Nm (35 lb.ft).