LR3/Disco 3
1 .
CAUTION: Make sure the anti-seize compound does not contact the HO2S tip.
Using the special tool, install the HO2S to the catalytic converter and tighten to 45 Nm (33 lb.ft).
Clean the components.
Apply an anti-seize compound to the thread of the HO2S.
2 .
Position the catalytic converter to the front muffler.
Clean the components.
Install a new gasket.
Tighten the nuts to 55 Nm (40 lb.ft).
3 .
Install the exhaust system. For additional information, refer to
Exhaust System (30.10.08)
(Section
309-00)
4 .
Connect the battery ground cable. For additional information, refer to
Specifications
(Section 414-00)
