LR3/Disco 3
6 . Connect the purge line.
7 .
Start and run the engine.
8 . For fuel pressure data, refer to specifications.
Specifications
9 . Close the special tool valve.
10 . Release the clip and disconnect the purge line.
11 . Disconnect the special tool from the Schraeder valve.
12 . Install the Schraeder valve cap.
13 . Connect the purge line.
14 . Install the engine cover.
Engine Cover - 4.0L (12.30.50)
15 . Connect the battery ground cable.
Specifications
WARNING: Do not carry or operate cellular phones when working on or near any fuel related
components. Highly flammable vapors are always present and may ignite. Failure to follow these instructions
may result in personal injury.
WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near
any fuel related components. Highly flammable vapors are always present and may ignite. Failure to follow
these instructions may result in personal injury.
WARNING: The spilling of fuel is unavoidable during this operation. Ensure that all necessary
precautions are taken to prevent fire and explosion.
Open the valve on the special tool.
Note the fuel pressure readings.
