LR3/Disco 3
Fuel System Pressure Release - 4.0L (19.50.02)
Special Service Tools
Adaptor fuel rail pressure check
310-116 (LRT-19-006A)
1 . Disconnect the battery ground cable.
Specifications
2 . Remove the engine cover.
Engine Cover - 4.0L (12.30.50)
3 . Release the clip and disconnect the purge line.
4 . Remove the fuel rail Schraeder valve cap.
5 . Install the special tool to the fuel rail Schraeder valve.
6 .
Published : Nov 18, 2004
WARNING: The spilling of fuel is unavoidable during this operation. Ensure that all necessary
precautions are taken to prevent fire and explosion.
WARNING: Do not carry or operate cellular phones when working on or near any fuel related
components. Highly flammable vapors are always present and may ignite. Failure to follow these instructions
may result in personal injury.
WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near
any fuel related components. Highly flammable vapors are always present and may ignite. Failure to follow
these instructions may result in personal injury.