LR3/Disco 3
12 .
Disconnect the fuel pump module electrical connector.
13 .
Release the purge line from the top of the fuel tank.
Remove the adhesive pad.
Release from the 5 clips.
14 .
Remove the fuel tank.
15 .
NOTE :
Do not disassemble further if the component is removed for access only.
With assistance, remove the fuel tank from the transmission jack.
16 .
CAUTION: Before disconnecting or removing components, ensure the area around the joint
faces and connections are clean. Plug open connections to prevent contamination.
Remove the fuel tank vent line.
Disconnect the quick release connector.
Remove from the 3 clips.
