LR3/Disco 3
Plenum Chamber (80.15.62)
Removal
Installation
Published : Apr 8, 2004
1 .
Remove the A-pillar mouldings. For additional information, refer to
A-Pillar Moulding LH
(Section
501-08)
2 .
Remove the windshield wiper arms. For additional information, refer to
Front Wiper Pivot Arm
(84.15.02)
(Section 501-16)
3 .
Release the hood seal from the plenum chamber.
4 .
Remove the plenum chamber panel.
Release the 8 clips.
5 .
NOTE :
Do not disassemble further if the component is removed for access only.
Remove the clips from the plenum chamber panel.
1 .
To install, reverse the removal procedure.
