LR3/Disco 3
Heater Core - LHD (80.20.29)
Removal
Installation
Published : Jun 14, 2004
1 .
Drain the cooling system. For additional information, refer to
Cooling System Draining, Filling and
Bleeding (26.10.01)
(Section 303-03)
2 .
Remove the instrument panel passenger side reinforcement. For additional information, refer
to
Instrument Panel Passenger Side Reinforcement (76.46.32)
(Section 501-12)
3 .
Remove the heater core upper and lower pipes.
Position a container to collect the fluid.
Loosen the 4 screws and remove the clips.
Remove and discard the 4 O-ring seals.
4 .
Remove the heater core.
1 .
Install the heater core.
2 .
Install the heater core upper and lower pipes.
Clean the components.
Install the new O-ring seals.
Install the clips and tighten the screws.
Remove the container.
