LR3/Disco 3
Installation
1 .
Install the condenser core.
Secure in the clips.
Tighten the screws.
Install the bolt and tighten to 10 Nm (7 lb.ft).
2 .
Install the power steering fluid cooler.
Secure the clips.
3 .
Install the reflector air deflector.
4 .
Install the radiator.
Tighten the bolts to 25 Nm (18 lb.ft).
5 .
CAUTION: Lubricate the new seals with clean refrigerant oil.
Connect the A/C pipes.
Remove the blanking caps from the ports.
Install new O-ring seals.
Install the bolts and tighten to 10 Nm (7 lb.ft).
6 .
Install the radiator grille. For additional information, refer to
Radiator Grille (76.55.03)
(Section 501-
08)