LR3/Disco 3
9 .
Release the 3 ground cables from the passenger side lower A-pillar.
Remove the 2 nuts.
10 .
Disconnect the heater motor electrical connector.
11 .
Disconnect the 5 electrical connectors from the passenger side lower A-pillar.
12 .
Disconnect 2 central junction box (CJB) electrical connectors.
13 .
Disconnect 2 electrical connectors from the instrument panel center reinforcement.
14 .
CAUTION: Cover fibre optic cable connectors to minimise dust ingress and avoid bending the
cables in a radius of less than 30 mm.
If installed, disconnect the instrument panel center reinforcement fibre optic cables.
Disconnect the electrical connector.