LR3/Disco 3
(80.15.62)
(Section 412-01)
19 .
Remove the instrument panel carrier to bulkhead Torx bolt.
20 .
With assistance, remove the instrument panel.
Remove the 6 Torx bolts.
21 .
CAUTION: Before disconnecting or removing the components, ensure the area around the
joint faces and connections are clean. Plug open connections to prevent contamination.
Disconnect 2 heater hoses from the bulkhead.
Release the 2 clips.
22 .
Release 2 A/C lines from the body.
Remove the nut.
23 .
CAUTION: Immediately cap all refrigerant lines to prevent ingress of dirt and moisture.