LR3/Disco 3
Installation
1 .
Install the evaporator core.
Install the evaporator end trim
2 .
Assemble the climate control unit.
Secure the clips.
Install the screws.
Install the clips.
3 .
Install the distribution motor.
Tighten the screw.
4 .
Install the heater core.
Install the heater core.
Secure in the 2 clips.
5 .
Install the TXV assembly.
Install new O-ring seals.
Install the bolts and tighten to 10 Nm (7 lb.ft).
Tighten the screws.
6 .
Install the climate control assembly. For additional information, refer to
Auxiliary Climate Control
Assembly (82.26.22)
(Section 412-03)