Removal of Parking Aid Module for LR3 / Disco 3 - Step-by-Step Guide
Parking Aid Module (86.54.10)
Removal
Installation
Published : Apr 5, 2004
1 .
Remove the C-pillar lower trim panel. For additional information, refer to
C-Pillar Lower Trim Panel
(76.13.34)
(Section 501-05)
2 .
Remove the parking aid module.
Disconnect the 3 electrical connectors.
Remove the 2 nuts.
1 .
Install the parking aid module.
Tighten the nuts to 5 Nm (4 lb.ft).
Connect the electrical connectors.
2 .
Install the C-pillar lower trim panel. For additional information, refer to
C-Pillar Lower Trim Panel
(76.13.34)
(Section 501-05)