LR3/Disco 3
NOTE :
Procedure 3
NOTE :
NOTE :
Procedure 4
Procedure 5
4. Open the hood
4. Operate parking brake switch several
times until parking brake warning lamp is
extinguished
5. Disconnect battery - GROUND lead first
1. Disconnect battery - The door unlock process initialises the ICE system.
Disconnect battery
Connect battery
1. Unlock the vehicle from the left hand front door using the key
1. Ensure that all electrical loads are
switched OFF
2. Enter the vehicle, turn the ignition key to position II, apply the parking
brake or chock the wheels and then turn the ignition key to position 0.
Remove the key to 'power down' the ICE system
2. Connect battery leads - GROUND lead
last
3. Wait 2 minutes for engine management system to 'power down'
3. Switch on ignition
4. Open the hood
4. Operate parking brake switch several
times until parking brake warning lamp is
extinguished
5. Disconnect battery - GROUND lead first
1. - Disconnect battery - The door unlock process initialises the ICE system
1. Connect battery - If there is insufficient capacity in the battery to disarm the alarm, the alarm may sound on
reconnection of the battery - Step 3 will disarm the alarm
Disconnect battery
Connect battery
1. Enter the vehicle, turn the ignition key to position II, apply the parking
brake or chock the wheels and then turn the ignition key to position 0.
Remove the key to 'power down' the ICE system
1. Ensure that all electrical loads are
switched OFF
2. Wait 2 minutes for engine management system to 'power down'
2. Connect battery leads - GROUND lead
last
3. Open the hood
3. Switch on ignition
4. Disconnect battery - GROUND lead first
4. Operate parking brake switch several
times until parking brake warning lamp is
extinguished
Disconnect battery
Connect battery
1. Enter the vehicle, turn the ignition key to position II, apply the parking
brake or chock the wheels and then turn the ignition key to position 0.
Remove the key to 'power down' the ICE system
1. Ensure that all electrical loads are
switched OFF
2. Wait 2 minutes for engine management system to 'power down'
2. Connect battery leads - GROUND lead
last
3. Open the hood
3. Switch on ignition
4. Disconnect battery - GROUND lead first
4. Operate parking brake switch several
times until parking brake warning lamp is
extinguished
