LR3/Disco 3
Rear Door Speaker (86.50.12)
Removal
Installation
Published : Jun 14, 2004
1 .
Remove the rear door trim panel. For additional information, refer to
Rear Door Trim Panel
(76.34.04)
(Section 501-05)
2 .
Remove the speaker.
Disconnect the electrical connector.
Remove the 4 screws.
1 .
Install the speaker
Tighten the screws.
Connect the electrical connector.
2 .
Install the rear door trim panel. For additional information, refer to
Rear Door Trim Panel (76.34.04)
(Section 501-05)