LR3/Disco 3
Battery Junction Box (BJB) - 4.4L (86.70.55)
Removal
All vehicles
Published : Jul 16, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Make the SRS system safe. For additional information, refer to
Standard Workshop Practices
(Section 100-00)
3 .
Remove the engine cover. For additional information, refer to
Engine Cover - 4.4L (12.30.50)
(Section 501-05)
4 .
Remove the radiator grille. For additional information, refer to
Radiator Grille (76.55.03)
(Section
501-08)
5 .
Remove the air cleaner assembly. For additional information, refer to
Air Cleaner (19.10.01)
(Section
303-12)
6 .
Remove the four-wheel drive control module. For additional information, refer to
Four-Wheel Drive
(4WD) Control Module (41.30.01)
(Section 308-07)
7 .
Remove the battery tray. For additional information, refer to
Battery Tray (76.10.30)
(Section 414-01)
8 .
Remove the auxiliary battery tray. For additional information, refer to
Auxiliary Battery Tray
(76.10.31)
(Section 414-01)
9 .
Remove the ECM cover.
Disconnect 2 electrical connectors for access.
Disconnect the 2 ECM electrical connectors.
Remove the 4 Torx screws.
10 .
Remove the ECM.
Remove the ECM top cover.