LR3/Disco 3
Installation
7 .
NOTE :
Do not disassemble further if the component is removed for access only.
Remove the stowage tray.
Release the cover.
8 .
Remove the audio control switch.
Release the 2 clips.
9 .
Remove the accessory socket.
1 .
Install the accessory socket.
2 .
Install the audio control switch.
Secure the clips.
3 .
Install the stowage tray.
Install the cover.
4 .
Install the rear quarter trim panel.
Install the clips.
Tighten the Torx screw to 8 Nm (6 lb.ft).