LR3/Disco 3
Installation
6 .
NOTE :
Do not disassemble further if the component is removed for access only.
Remove the 12 clips from the tailgate trim panel.
1 .
Install the tailgate trim panel.
Install the clips.
2 .
Lower the tailgate hinge cover.
3 .
Tighten the support strut spigot to 25 Nm (18 lb.ft).
4 .
Position the support cables to the tailgate and secure with the clips.
5 .
Install the tailgate upper trim panel.
Secure with the clips.
Install the screws.
Install the screw covers.