LR3/Disco 3
Fender Moulding (76.43.54)
Removal
Published : May 13, 2004
1 .
Remove the headlamp assembly. For additional information, refer to
Headlamp Assembly (86.40.49)
(Section 417-01)
2 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
3 .
Remove the mud flap.
Remove the 3 retaining screws.
4 .
Remove the 4 retainers.
5 .
Remove the fender moulding.
Remove the 2 screws.
Carefully release the 10 clips.