LR3/Disco 3
Rear Quarter Panel Moulding (76.43.55)
Removal
Installation
Published : Mar 4, 2004
1 .
Remove the mud flap.
Remove the 3 screws.
2 .
Remove the rear quarter panel moulding.
Remove the 3 clips from the underside of the moulding.
Release the 6 clips from the rear quarter panel.
3 .
NOTE :
Do not disassemble further if the component is removed for access only.
Remove the clips from the moulding.
1 .
To install, reverse the removal procedure.